Dell PowerEdge M520 Hardware Owner's Manual - Page 51
Full-Height Blades, Slot Mezz1_Fabric_C and slot Mezz3_Fabric_C support Fabric C.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Full-Height Blades Full-height blades support four mezzanine cards: • Slot Mezz1_Fabric_C and slot Mezz3_Fabric_C support Fabric C. They must match the fabric type of the I/O modules installed in I/O module slots C1 and C2. • Slot Mezz2_Fabric_B and slot Mezz4_Fabric_B support Fabric B. They must match the fabric type of the I/O modules installed in I/O module slots B1 and B2. Half-Height Blades Half-height blades support two mezzanine cards: • Mezzanine card slot C supports Fabric C. This card must match the fabric type of I/O modules installed in I/O module slots C1 and C2. • Mezzanine card slot B supports Fabric B. This card must match the fabric type of I/O modules installed in I/O module slots B1 and B2. See "I/O Module Mezzanine Cards" on page 198 for more information on mezzanine cards. Table 1-12 shows various supported combinations of mezzanine cards and I/O modules. Table 1-12. Supported I/O Module Configurations Fabric A Standard Integrated LOM Standard Integrated LOM Fabric B Mezzanine Card none Ethernet mezzanine card Fabric C Mezzanine Card none none I/O Bay A1, A2 Ethernet switch module or passthrough module Ethernet switch module or passthrough module I/O Bay B1, B2 none Ethernet switch module or passthrough module I/O Bay C1, C2 none none About Your System 51