Dell PowerEdge M520 Information Update - Page 24
Installing a Hard Drive In a Drive Carrier, See
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing a Hard Drive In a Drive Carrier 1 Insert the hard drive into the hard-drive carrier with the drive's controller board's connector end of the drive at the back of the carrier. See Figure 1-5. 2 From the back of the carrier, slide the drive into the carrier until it contacts the stop tab on the front of the carrier. 3 Align the screw holes on the hard drive with the holes on the hard-drive carrier. For SATA drives, align the drive mounting holes with the carrier mounting holes marked SATA. See Figure 1-5. 4 Attach the four screws to secure the hard drive to the hard-drive carrier. CAUTION: To avoid damaging the drive or the carrier, do not overtighten the screws. 24 Information Update
24
Information Update
Installing a Hard Drive In a Drive Carrier
1
Insert the hard drive into the hard-drive carrier with the drive’s
controller board’s connector end of the drive at the back of the carrier.
See Figure 1-5.
2
From the back of the carrier, slide the drive into the carrier until it
contacts the stop tab on the front of the carrier.
3
Align the screw holes on the hard drive with the holes on the hard-drive
carrier. For SATA drives, align the drive mounting holes with the carrier
mounting holes marked
SATA
. See Figure 1-5.
4
Attach the four screws to secure the hard drive to the hard-drive carrier.
CAUTION:
To avoid damaging the drive or the carrier, do not overtighten
the screws.