Dell PowerEdge M520 Dell 10 Gb Ethernet Pass Through-k for M1000e So - Page 8
Installation and Basic Operation
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Rev 1.0 2 Installation and Basic Operation Installation and Basic Operation 2.1 Unpacking the Pass Through Module Before you install your new PTM, unpack it and make sure that there is no visible damage that may have occurred during shipping. Your package should contain the following items: • Dell 10Gb Ethernet Pass Through -k module for Blade Servers • This Users Manual The PTM is shipped without optical modules. If anything in the package is damaged or missing, please contact your customer representative immediately. 2.2 Insertion and Removal of the PTM The Dell 10Gb Ethernet Pass Through -k module may be plugged into fabric slots A1, A2, B1, B2, C1, and C2. Determine which slot to use, based on desired system configuration. 2.2.1 PTM Insertion Insert the PTM into the chassis as shown in the following diagram: Figure 3: Dell Chassis Slots for the PTM Slot A1 Slot B1 Slot C1 Slot C2 Slot B2 Slot A2 8