Dell PowerEdge M600 Fabric OS Documentation Updates - Page 22
Fabric Watch Thresholds, In-between buffer values, Fabric Watch Activation
View all Dell PowerEdge M600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5 Chapter 2, Fabric Watch Thresholds Chapter 2, Fabric Watch Thresholds On page 15 and 16, the sections "High and low thresholds" have been changed to include the following expanded threshold categories: • Above high threshold • Below high threshold • Above low threshold • Below low threshold NOTE The above low threshold action applies only to the portThConfig command. It does not apply to the thConfig and sysMonitor commands. In-between buffer values The below high threshold is the term used to configure "in between" buffer values, as shown below. In this example, the high threshold value is 5 and the buffer value is 1. Therefore, the "in-between" boundary value is 4. Enter the portThConfig command using the following parameters. portthconfig --set port -area crc -highth -value 4 -trigger below -action raslog Above high threshold Above action = 5 BUFFER = 1 Below high threshold Low action Above low threshold In-between Above action BUFFER Below low threshold Low action Chapter 4, Fabric Watch Activation On page 30 "snmpConfig -set" should appear as "snmpConfig --set". 16 Fabric OS Documentation Updates 53-1002063-03