Dell PowerEdge M610 Fabric OS Command Reference Manual Supporting Fabric - Page 268
force a fabric rebuild. Mode changes take effect when the fabric rebuilds., This operand is optional.
View all Dell PowerEdge M610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
2 fabricPrincipal Examples See Also 0x02 Switch was principal prior to sending or receiving a build fabric (BF) request. This value is generated by the switch to initiate a fabric reconfiguration. This value cannot be assigned. 0x3 - 0xFE Priority value range. Choose a value in this range to indicate priority. Higher numbers mean lower priority. 0xFF Switch is not capable of acting as a principal switch. This is a user-defined value. Use --enable with a new priority to revert to this condition. -force|-f Forces a fabric rebuild. This option is required when enabling principal switch mode. This option is not valid with the --disable command. --disable [-f ] mode Disables principal switch selection. This command resets the priority to the default value 0xFE. Sets the principal switch mode. Specify 1 to enable principal switch mode. Specify 0 to disable principal switch mode. Optionally use the -f operand to force a fabric rebuild. Mode changes take effect when the fabric rebuilds. This operand is optional. To enable a high fabric principle priority setting: switch:admin> fabricprincipal --enable -p 0xff -f Principal Selection Mode enabled (Activate in next fabric rebuild) To disable the principal mode selection: switch:admin> fabricprincipal --disable Principal Selection Mode disabled To display the current mode setting: switch:admin> fabricprincipal -q Principal Selection Mode: Enable To disable the mode setting: switch:admin> fabricprincipal 0 Principal Selection Mode disabled To enable the mode setting: switch:admin> fabricprincipal 1 Principal Selection Mode enabled To enable the mode setting and force fabric rebuild: switch:admin> fabricprincipal -f 1 Principal Selection Mode enabled (Forcing fabric rebuild) To display the principal switch selection priority: switch:admin> fabricprincipal --show Principal Selection Mode: Enable Principal Switch Selection Priority: 0x10 fabricShow 236 Fabric OS Command Reference 53-1001764-02