Dell PowerEdge M610 Fabric OS Command Reference Manual Supporting Fabric - Page 786

2 portShow - FICON configuration parameters - IPSec status and key - Circuits with the tunnel - QoS statistics including performance for each priority - FCIP Tunnel hierarchy listing circuit IDs and TCP connection information for the tunnel • portShow fcipcircuit - Displays status and configuration for FCIP circuits: - TCP statistics for the circuit - Circuit-level VLAN tagging configuration - Circuit-level Differentiated Services (DSCP) markings • portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the VE_Port to be displayed, followed by a slash (/). ve_port Displays information for a single specified FCIP tunnel. On the Brocade 7800/FX8-24, specify the VE_Port number associated with the tunnel configured on one of the GbE ports. VE_Ports are numbered 16-23 on the Brocade 7800 and 12-31 on the Brocade FX8-24 blade. all Displays information for all configured FCIP tunnels. fciptunnel Displays configuration and status per FCIP tunnel. The following operands are supported with fciptunnel and fcipcircuit. -c | --circuit Displays the FCIP circuits within the tunnel. This operand can be used with any other operand to include circuit displays. -t | --tcp Displays the TCP statistics for the circuit. The -c option must be specified with this option. -p | --perf Displays additional performance information for the specified FCIP tunnels. -q | --qos Displays the QoS statistics including performance for each priority. This operand is optional with the --perf option. -i | --ipsec Displays IPSec status (enabled or disabled) and key if enabled. This option is valid for portShow fciptunnel only. -h | --hier Displays the FCIP tunnel hierarchy listing basic circuit IDs and TCP connection information for the tunnel. fcipcircuit circuit_ID Displays FCIP circuit configuration and status. The following operands are supported with portShow fcipcircuit: Specifies a single circuit within the FCIP tunnel. The circuit ID is an integer value between 1 and 19 on the Brocade FX8-24 and 1 and 7 on the Brocade 7800. This operand is required. -t | --tcp Displays the TCP statistics for the specified circuit. -p | --perf Displays additional performance information for the specified FCIP circuit. -q | --qos Displays the QoS statistics including performance for each priority. This operand is optional with the --perf option. 754 Fabric OS Command Reference 53-1001764-02