Dell PowerEdge M820 Dell 10Gb Ethernet Pass Through II for M1000e Software Use - Page 17

Debug Commands

Get Dell PowerEdge M820 PDF manuals and user guides View all Dell PowerEdge M820 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Dell 10Gb Ethernet Pass Through II 11 B 10G 10G SFP SX # # show port link 7 Port Group Connect Downlink Uplink 7 A down down SFP+ SR # Rev 1.00 3.7.2 show port module Synopsis: show port module port_number Description: Show the transceiver module information for the specified uplink port. Example: # show port module 1 Status OK Gigabit Ethernet Compliance Codes 10GBASE-SR Vendor Name FINISAR CORP. Vendor Part Number FTLX8571D3BCL-ME Vendor Serial Number UDD01@A Vendor Revision Number A # 3.8 Debug Commands 3.8.1 cr_read (ADMIN) Synopsis: cr_read device_number 0xaddress Description: Read an internal PhyX device register. This command accepts the following parameters: >device_number - the device from which to read a register (1..3) >address - the register memory location from which to read (32-bit address) Example: & cr_read 2 0xf0014 0x000f0014:0x00a217d4 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Dell 10Gb Ethernet Pass Through II
Rev 1.00
17
11
B
10G
10G
SFP SX
#
# show port link 7
Port
Group
Connect
Downlink
Uplink
--------------------------------------------------------
7
A
down
down
SFP+ SR
#
3.7.2
show port module
Synopsis:
show port module
port_number
Description:
Show the transceiver module information for the specified uplink port.
Example:
# show port module 1
Status
.........................................
OK
Gigabit Ethernet Compliance Codes
..............
10GBASE-SR
Vendor Name
....................................
FINISAR CORP.
Vendor Part Number
.............................
FTLX8571D3BCL-ME
Vendor Serial Number
...........................
UDD01@A
Vendor Revision Number
.........................
A
#
3.8
Debug Commands
3.8.1
cr_read (ADMIN)
Synopsis:
cr_read
device_number
0x
address
Description:
Read an internal PhyX device register. This command accepts the following parameters:
>device_number – the device from which to read a register (1..3)
>address – the register memory location from which to read (32-bit address)
Example:
& cr_read 2 0xf0014
0x000f0014:0x00a217d4