Dell PowerEdge MX7000 Deploying Using OpenManage Mobile OMM App - Page 6

Change the root password for the Chassis The default password can be found on the Liquid-Crystal Display (LCD) panel, or on a pull-out tag below the LCD (see figure below). If the default root password is "calvin", the MAC address of the MM module will be displayed on the LCD. LCD with QR code and MAC address Because of its visibility, the default password may be compromised through the shipping process. The user must use the default password for initial login, and change the password immediately. The user can log to OMM app in by either entering the user credential manually or by scanning the Quick Response (QR) code on the LCD or on the pull-out tag. NOTE: The QR code on the LCD is only available when the password is the same as the default password. If the password is "calvin", the user also needs to enter the MAC address as an extra step to login to the chassis using the OMM app. The new password must meet the following conditions: • at least 8 characters • at least 1 upper case letter • at least 1 lower case letter • at least 1 special characters • at least 1 number Once the password is decided, the user navigates to the change password panel to change the password (Figure 2) 6 Deploying PowerEdge MX7000 Using OpenManage Mobile (OMM) App | Document ID