Dell PowerEdge R200 Information Update   - Page 2

Removing and Installing the Optional SATA Optical Disk Drive The following section updates the optical disk drive removal and installation procedures in your system documentation. Removing the Optical Drive CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2 Open the system. See "Opening the System" in your Hardware Owner's Manual. 3 Disconnect the SATA power and data cables from the optical drive. See Figure 1. 4 Press the bracket release lever that secures the optical drive to the hard drive 0 carrier. 5 Lift and tilt the optical drive up and out of the bracket.