Dell PowerEdge R200 Information Update   - Page 3

Figure 1. Removing and Installing the Optional SATA Optical Drive 1 2 3 4 6 5 1 SATA data cable 4 mounting holes (4) 2 SATA power cable 5 bracket release lever 3 retaining pins (4) 6 hard drive 0 Installing the Optical Drive CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system. 1 Align the optical drive's mounting holes with the retaining pins on the hard drive 0 bracket. See Figure 1. 2 Rotate the drive downward until it snaps into place. 3 Connect the SATA data and power cables to the optical drive. 4 Close the system. See "Closing the System" in your Hardware Owner's Manual.