Dell PowerEdge R200 Information Update - Dell OpenManage&#153 Server Suppo - Page 3

www.dell.com | support.dell.com Figure 2. DRAC 4/P Video and NIC Connector Locations card video connector card NIC connector 10 Configure the DRAC 4/P card: a During boot, the DRAC 4/P setup program option appears. Press and enter the DRAC 4/P setup program. b Configure the DRAC 4/P as explained in the Dell Remote Access Controller 4 User's Guide. c Exit the DRAC 4/P setup program. The system then continues its boot. If you are running a Microsoft® Windows® operating system, the operating system detects several new DRAC 4/P-related devices as it starts. The drivers for those devices are located in one of the following paths under the Systems Management group on the Dell OpenManage Server Assistant CD: Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2003 DRAC4 Drivers (Self Extracting Zip) or Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2000 DRAC4 Drivers (Self Extracting Zip) NOTE: The screen may blink several times as Windows starts and the Hardware Wizard discovers the new DRAC 4/P display adapter. NOTE: Novell® NetWare® and Red Hat® Linux operating systems use native drivers.