Dell PowerEdge R240 EMC Technical Specifications Guide - Page 9
System battery specifications, Expansion card riser specifications, Memory specifications, Storage - ram
View all Dell PowerEdge R240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA. Table 5. Dell EMC PowerEdge R240 fan support matrix Front storage Max allowable 3.5-inch drive counts = 2 Fan 1 Required when PCIe is installed Fan 2 Required Max allowable 3.5-inch drive counts = 4 Required when PCIe is installed Required Fan 3 Required Required Fan 4 N/A Required System battery specifications The Dell EMC PowerEdge R240 system supports CR 2032 3.0-V lithium coin cell system battery. Expansion card riser specifications The Dell EMC PowerEdge R240 system supports up to two PCI express (PCIe) generation 3. Table 6. Expansion card slots supported on the system board PCIe slot Slot 1 Riser x8 PCIe PCIe slot height Low-profile PCIe slot length Half-length Slot 2 x16 PCIe Low-profile/Full-height Half-length Slot width x8 x16 Memory specifications The PowerEdge R240 system supports the following memory specifications for optimized operation. Table 7. Memory specifications DIMM type UDIMM DIMM rank Single rank Dual rank DIMM capacity 8 GB 16 GB 8 GB 16 GB Minimum RAM 8 GB 16 GB 8 GB 16 GB Table 8. Memory module sockets Memory module sockets Four 288-pin Speed 2666 MT/s Maximum RAM 32 GB 64 GB 32 GB 64 GB Storage controller specifications The Dell EMC PowerEdge R240 system supports the following controller cards: Table 9. Dell EMC PowerEdge R240 system controller cards Internal controllers External controllers • PERC H730P • PERC H330 • S140 • HBA330 • 12Gbps SAS Ext. HBA Technical specifications 9