Dell PowerEdge R740xd2 iDRAC9 with Lifecycle Controller Version 3.30.30.30 RAC - Page 254

Default Value Write Privilege License Required Dependency • 0 - Not Redundant - In this mode, even if one PSU stops functioning, the server is automatically turned off. • 1 - Input Power Redundant - In this mode, the system is functional even if one PSU input circuit stops functioning, provided the PSUs are connected to different input circuits. This is also called AC redundancy. • 2 - PSU Redundant - Available only on systems with four PSUs. This is also called DC redundancy. This is only valid in a 2+1 PSU configuration. In this mode, the system is functional even if one PSU stops functioning. N/A Login and configure iDRAC iDRAC Express or iDRAC Enterprise None NOTE: In a two PSU system, you must set the primary PSU (that must be ON). In a four PSU system, you must set the pair of PSUs (1+3 or 2+4) that must be ON. System.Power.Cap.Watts (Read or Write) Table 430. Details of System.Power.Cap.Watts Description Represents the Maximum Power in Watts a device is allowed to consume. To meet this capacity , throttle the device. NOTE: This value is applicable only if System.Power.Cap.Enable is set to 1. Legal Values Values 0-100 Default Value Server power threshold in watts Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependency Enable System.Power.Cap.Enable System.Power.EnergyConsumption (Read Only) Table 431. Details of System.Power.EnergyConsumption Description Represents the Cumulative power consumption by the blade or system. Legal Values Values: 1-65535 Default Value Cumulative power consumption Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependency None System.Power.EnergyConsumption.Clear (Read or Write) Table 432. Details of System.Power.EnergyConsumption.Clear Description Clears the cumulative power consumption timestamps. 254 Database Objects With Get and Set Commands