Dell PowerEdge R805 Information Update - Page 9
SUSE® Linux Enterprise Server 9 (x86_64) Update, SP3 Update - servers
View all Dell PowerEdge R805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8 Insert a different SD card or USB key that you know works properly. 9 Close the system. See "Opening and Closing the System" in the Hardware Owner's Manual. 10 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. If the problem is not resolved, proceed to the next step. 11 Repeat step 2 and step 3. 12 Remove the expansion cards from the appropriate expansion-card riser- riser 1 for an SD card problem or riser 2 for a USB memory key problem. See "Removing an Expansion Card" in the Hardware Owner's Manual. 13 Reseat the expansion-card riser in its socket. See "Expansion-Card Risers" in the Hardware Owner's Manual. 14 Reinstall the expansion cards you removed in step 12. 15 Close the system. See "Opening and Closing the System" in the Hardware Owner's Manual. 16 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. If the problem is not resolved, see "Getting Help" in the Hardware Owner's Manual. SUSE® Linux Enterprise Server 9 (x86_64) Update SP3 Update SATA optical disk drives are not supported by SUSE Linux Enterprise Server service pack 3 (SP3). The following error messages may appear when attempting to install the operating system from a SATA optical disk drive: cannot read media device not mounted To resolve this issue, install the operating system from the network or from an external USB optical drive. Support for SATA optical drives will be provided in SP4. Information Update 7