Dell PowerEdge R810 Hardware Owner's Manual - Page 110
Installing a Cooling Fan, Removing the Cooling Fan Assembly
View all Dell PowerEdge R810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Installing a Cooling Fan WARNING: Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise utmost care while removing or installing cooling fans. 1 Align the connector on the fan with the connector on the system board. 2 Lower the fan into the cooling fan assembly until the release tab snaps into place. See Figure 3-12. 3 Close the system. See "Closing the System" on page 85. Removing the Cooling Fan Assembly CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Open the system. See "Opening the System" on page 84. 3 Lift the blue release levers in the direction of the arrows to release the cooling fan assembly from the chassis. See Figure 3-13. 4 Grasp the blue release levers and lift the cooling fan assembly out of the system. See Figure 3-13. 110 Installing System Components