Dell PowerEdge R900 Information Update - Page 3

Table 1. LCD Status Messages (continued) Code Test Causes Corrective Actions E1716 Chipset The BIOS has determined See "Getting Help" in your that there is a problem Hardware Owner's Manual. with the chipset, but is unable to determine its origin. E1717 IERR CPU is faulty. Applicable only for BIOS 1.1.9 and BMC 2.27 and later. Either the CPU or system board must be replaced. See "Getting Help" in your Hardware Owner's Manual. E1914 DRAC5 Conn 2 Cbl DRAC5 cable is missing, loose, or faulty. Reseat the cable. If problem persists, replace the cable. See "Getting Help" in your Hardware Owner's Manual. E2122 Fatal Mem Reset System memory failed. See "Troubleshooting System Memory" in your Hardware Owner's Manual. I1915 Video Off Local video is disabled. Information only. I1916 Video Off in XX Remote disabling of local Information only. video currently in process. NOTE: For the full name of an abbreviation or acronym used in this table, see "Glossary" in your Hardware Owner's Manual. New SEL Sensor Messages The following SEL sensor messages have been added to the systems management software and remote access card software. Table 2. Sensor Message Definitions Sensor Number Message 0x26 PCIE Non Fatal error Definition A non-fatal error occurred. The system will continue to operate normally.