Dell PowerEdge SC1435 Getting Started Guide - Page 5
System Features - operating temperature
View all Dell PowerEdge SC1435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
System Features The major hardware and software features of your system include: • One or two dual-core AMD Opteron 2000 Series processors. • A minimum of 1 GB (single-processor systems) or 2 GB (dual-processor systems) of 667-MHz registered DDR-II memory modules. Memory is upgradable to a maximum of 32 GB by installing combinations of 512-MB, 1-GB, 2-GB, or 4-GB memory modules in the eight memory module sockets on the system board. • Support for either two 3.5-inch, internal SATA hard drives or two optional 3.5-inch, internal SAS hard drives. (An optional SAS controller card is required for SAS hard-drive support. This optional SAS controller also supports RAID levels 0 and 1.) • An optional slimline IDE optical drive. • An optional external USB diskette drive. • A 600-W power supply. • Four dual-rotor fan modules. The system board includes the following features: • One of the following riser card options: - A riser card supporting one x8 lane-width PCI-Express (PCIe) half-length expansion slot. or - A riser card supporting one 3.3-V, 64-bit, 133-MHz PCI-X half-length expansion slot. This PCI-X slot also supports legacy PCI expansion cards. • Two integrated Gb Ethernet NICs, capable of supporting 10-Mbps, 100-Mbps, and 1000-Mbps data rates. • Four USB 2.0-compliant connectors (two on the system front panel and two on the back panel), capable of supporting a diskette drive, an optical drive, a keyboard, a mouse, or a USB flash drive. • An integrated VGA-compatible video subsystem based on an integrated ATI RN50 PCI video controller. The video subsystem includes a minimum of 16 MB of graphics memory and supports various 2D graphics video modes. Maximum resolution is 1600x1200 with 65,536 colors. • Systems management circuitry that monitors operation of the system fans as well as critical system voltages and temperatures. • Back-panel connectors including serial, video, two USB connectors, and two NIC connectors. • Front-panel connectors including a video connector and two USB connectors. For more information about specific features, see "Technical Specifications" on page 9. Getting Started With Your System 3