Dell PowerEdge T410 Information Update - Processor Installation - Page 9

See Running the System Diagnostics in the, System Setup Program in

Get Dell PowerEdge T410 PDF manuals and user guides View all Dell PowerEdge T410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

b Open the grease applicator included with your processor kit and apply all of the thermal grease in the applicator to the center of the topside of the new processor. c Place the heat sink on the processor. See Figure 1-1. d Close the heat-sink release levers or replace the screws at the corners of the heat sink. See your Hardware Owner's Manual for a systemspecific illustration. See Figure 1-1. 12 Replace the cooling shroud. See "Installing the Cooling Shroud" in the Hardware Owner's Manual. 13 Close the system. See "Closing the System" in the Hardware Owner's Manual. 14 Reconnect your system and peripherals to their electrical outlets, and turn on the system. 15 Press to enter the System Setup program, and check that the processor information matches the new system configuration. See "Entering the System Setup Program" in the Hardware Owner's Manual. 16 Run the system diagnostics to verify that the new processor operates correctly. 17 See "Running the System Diagnostics" in the Hardware Owner's Manual for information about running the diagnostics. Processor Installation 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Processor Installation
9
b
Open the grease applicator included with your processor kit and apply
all of the thermal grease in the applicator to the center of the topside
of the new processor.
c
Place the heat sink on the processor. See
Figure 1-1
.
d
Close the heat-sink release levers
or replace the screws at the corners
of the heat sink. See your
Hardware Owner’s Manual
for a system-
specific illustration. See Figure 1-1.
12
Replace the cooling shroud. See "Installing the Cooling Shroud" in the
Hardware Owner’s Manual
.
13
Close the system. See "Closing the System" in the
Hardware Owner’s
Manual
.
14
Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
15
Press <F2> to enter the System Setup program, and check that the processor
information
matches the new system configuration. See "Entering the
System Setup Program" in the
Hardware Owner’s Manual
.
16
Run the system diagnostics to verify that the new processor operates
correctly.
17
See "Running the System Diagnostics" in the
Hardware Owner’s Manual
for information about running the diagnostics.