Dell PowerStore 1000T EMC PowerStore CLI Guide - Page 222
chap_config, show, Attributes, Property capabilities
View all Dell PowerStore 1000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
json Display output in JSON format. chap_config CHAP is enabled (or not) identically cluster-wide for all iSCSI targets. For both single and mutual CHAP authentication modes, the common username and password for all targets on the cluster are set here. For mutual mode, each initiator also has a CHAP username and password set. Changing the cluster CHAP mode disrupts all iSCSI connections, and will disable connections that are not completely and correctly configured. For example, an initiator without a valid CHAP username and password will lose connectivity to the target if mutual model is enable here. Both the settings here, and the settings on the initiators can be modified while CHAP mode is in disabled mode. Attributes id Unique id of the CHAP config settings instance (always "0"). mode Available CHAP modes that describe or set the iSCSI CHAP mode for the entire cluster. Disabled CHAP is not used in the cluster Single CHAP is being used to authenticate the initiator Mutual CHAP is used to authenticate both the initiator and target mode_l10n Localized message string corresponding to mode show Property capabilities Attribute id mode mode_l10n Select X Sort X X 195