Dell PowerSwitch S4112F-ON EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 166

▪ auth-password - Enter a text string used to generate the authentication key that identifies the user. A maximum of 32 alphanumeric characters. For an encrypted password, enter the encrypted string instead of plain text. ○ priv - (SNMPv3 only) Configure encryption for SNMPv3 messages sent to the host: ▪ aes - Encrypt messages using an AES 128-bit algorithm. ▪ des - Encrypt messages using a DES 56-bit algorithm. ▪ priv-password - Enter a text string used to generate the privacy key used in encrypted messages. A maximum of 32 alphanumeric characters. For an encrypted password, you can enter the encrypted string instead of plain text. • community-name - (Optional) Enter an SNMPv1 or SNMPv2c community string name or an SNMPv3 user name. • udp-port port-number - (Optional) Enter the UDP port number on the SNMP host, from 0 to 65535. • dom | entity | envmon | lldp | snmp - Enter one or more types of traps and notifications to send to the SNMP host - digital optical monitor, entity change, environment monitor, or LLDP state change traps, or SNMP-type notifications. Defaults Not configured Command Mode CONFIGURATION Usage Information The local SNMP agent sends SNMP notifications, traps, and informs to SNMP managers configured as host receivers. You can configure multiple host receivers. An SNMP host does not acknowledge the trap messages and notifications received from the SNMP agent. SNMP hosts send an acknowledgement when receiving informs. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. The no version of the command disables the local agent from sending SNMP traps, informs, or notifications to a host receiver. Example - Send SNMP traps to host OS10(config)# snmp-server host 1.1.1.1 traps version 3 priv user01 udp-port 32 entity lldp Example - Send SNMP informs to host Example - Send SNMP notifications to host Supported Releases OS10(config)# snmp-server host 1.1.1.1 informs version 2c public envmon snmp OS10(config)# snmp-server host 1.1.1.1 version 3 noauth u1 snmp lldp 10.2.0E or later snmp-server location Configures the location of the SNMP server. Syntax snmp-server location text Parameters text - Enter an alphanumeric string. A maximum of 55 characters. Default None Command Mode CONFIGURATION Usage Information Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. The no version of this command removes the SNMP location. Example OS10(config)# snmp-server location datacenter10 166 System management