Dell PowerSwitch S4820T Configuration Guide for the S4820T System 9.112.1P1 - Page 846

MIB Object copySrcFileName copyDestFileType copyDestFileLocation copyDestFileName copyServerAddress copyUserName copyUserPassword OID .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 .1.3.6.1.4.1.6027.3.5.1.1.1.1.5 .1.3.6.1.4.1.6027.3.5.1.1.1.1.6 .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Object Values 6 = usbflash Description Path (if the file is not in the current directory) and filename. Specifies name of the file. • If copySourceFileType is set to running-config or startupconfig, copySrcFileName is not required. 1 = Dell Networking OS file 2 = running-config 3 = startup-config Specifies the type of file to copy to. • If copySourceFileType is running-config or startupconfig, the default copyDestFileLocation is flash. • If copyDestFileType is a binary, you must specify copyDestFileLocation and copyDestFileName. 1 = flash 2 = slot0 3 = tftp 4 = ftp 5 = scp Specifies the location of destination file. • If copyDestFileLocation is FTP or SCP, you must specify copyServerAddress, copyUserName, and copyUserPassword. Path (if the file is not in the default directory) and filename. IP Address of the server. Specifies the name of destination file. The IP address of the server. • If you specify copyServerAddress, you must also specify copyUserName and copyUserPassword. Username for the server. Username for the FTP, TFTP, or SCP server. • If you specify copyUserName, you must also specify copyUserPassword. Password for the server. Password for the FTP, TFTP, or SCP server. 846 Simple Network Management Protocol (SNMP)