Dell PowerVault 136T LTO Update the LTO-1 Tape Drive Modules to LTO-2 Tape Dri - Page 4
Updating the Tape Library Firmware, Updating the Firmware Through the Serial Port - website
View all Dell PowerVault 136T LTO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
www.dell.com | support.dell.com Figure 1-1. Removing and Installing the Tape Drive Module filler plate drive module captive thumbscrews Updating the Tape Library Firmware Use one of the following two methods to update the tape library firmware: • Tape library serial port • Remote management controller card You must download the latest firmware package from the Dell Support website at support.dell.com. After you download the package, the firmware file will be located at c:\dell\drivers\rxxxxx\library\LTO2, where rxxxxx is the release number of the downloaded firmware package. Updating the Firmware Through the Serial Port 1 Turn on the tape library. 2 Connect one end of the straight-through serial cable to the tape library serial port. 3 Connect the opposite end of the cable to a COM port on the system where you downloaded the firmware file. 1-2 Updating Tape Drive Modules