Dell PowerVault 725N Information Update for Systems With Hardware RAID - Page 6

Connect the cable that was supplied with the replacement CERC card to the four

Get Dell PowerVault 725N PDF manuals and user guides View all Dell PowerVault 725N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

www.dell.com | support.dell.com 6 Disconnect the CERC card's cable from the backplane. 7 Remove the plastic insert adjacent to the expansion slots. See Figure 1-4. Figure 1-4. Removing the Plastic Insert plastic insert PCI slot 1 PCI slot 2 8 Grasp the expansion card and carefully pull it away from the riser-card connector. 9 Disconnect the cable from the CERC card. 10 Connect the cable that was supplied with the replacement CERC card to the four connectors on the bottom of the replacement card in the order shown in Figure 1-5. 11 Route the CERC card's cable between the guide tabs and the side of the chassis as you lower the card into the system. See Figure 1-5. 1-4 Information Update

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
1-4
Information Update
www.dell.com | support.dell.com
6
Disconnect the CERC card’s cable from the backplane.
7
Remove the plastic insert adjacent to the expansion slots. See Figure 1-4.
Figure 1-4.
Removing the Plastic Insert
8
Grasp the expansion card and carefully pull it away from the riser-card connector.
9
Disconnect the cable from the CERC card.
10
Connect the cable that was supplied with the replacement CERC card to the four
connectors on the bottom of the replacement card in the order shown in Figure 1-5.
11
Route the CERC card’s cable between the guide tabs and the side of the chassis as you
lower the card into the system. See Figure 1-5.
plastic insert
PCI slot 1
PCI slot 2