Dell PowerVault DX6004S Dell DX6004S Hardware Owners Manual - Page 114
Rotate the processor shield upward and out of the way. See
View all Dell PowerVault DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Figure 3-16. Removing and Installing the Heat Sink 2 1 1 heat-sink retention screws (4) 2 heat sink 11 Rotate the processor shield upward and out of the way. See Figure 3-17. 12 Lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor. CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board. 114 Installing System Components
114
Installing System Components
Figure 3-16.
Removing and Installing the Heat Sink
11
Rotate the processor shield upward and out of the way. See Figure 3-17.
12
Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
1
heat-sink retention screws (4)
2
heat sink
1
2