Dell PowerVault MD3260 Dell PowerVault MD Series Storage Arrays SMI-S Provide
Dell PowerVault MD3260 Manual
 |
View all Dell PowerVault MD3260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerVault MD3260 manual content summary:
- Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 1
Dell PowerVault MD Series Storage Arrays SMI-S Provider Installation Guide - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 2
how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2012 Dell Inc. Trademarks used in this text: Dell™, the Dell logo, Dell Precision™ , OptiPlex™, Latitude™, PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, Compellent - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 3
Warnings 2 1 SMI-S Provider Installation Guide 5 Introduction...5 Version Information...5 Supported Profiles And Sub-Profiles...5 Installing And Uninstalling The SMI-S Provider...6 System Requirements For SMI-S Provider...6 Installing SMI-S Provider...7 Configuring CIM Server...7 Uninstalling SMI - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 4
4 - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 5
interface to the Dell PowerVault MD Series storage arrays. The provider uses the proxy CIM Agent model and is supported on Microsoft Windows and Linux platforms only. For more information about the platform versions, see the Support Matrix for the MD Series storage arrays at support.dell.com/manuals - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 6
per storage array. There is no limit on the number of storage systems that can be supported by a single provider instance. The recommended maximum is 10 for moderately to fully configured storage systems per provider, or a total of around 5000 volumes. In large configurations, deploy additional - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 7
icon and follow the instructions on the screen. NOTE: The installation prompts you to enter an IP address for the storage array that you want to CIMOM configuration, see Configuring CIM Server. Configuring CIM Server Use the following commands to perform basic CIM server configuration operations. - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 8
Function To enable or disable service location protocol (SLP) Command # cimconfig -s slp={true | false} -p If SLP is enabled, see the table below for additional settings information. Commands are of the following - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 9
Dell SMI-S Provider to uninstall it. The uninstallation procedure may leave files (such as trace files, repository files, and other administrative files) that were created by SMI-S Provider after the installation was complete. Manually Adding Or Removing A Storage Array From The SMI-S Provider During - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 10
/Dell/pegasus/provider/array for Windows. - /opt/dell/pegasus/array for Linux. And Stopping The OpenPegasus CIM Server. Troubleshooting The SMI-S Provider The following table non-standard port, dynamic SLP discovery of the CIM service is not possible. The CIM client methods fail - Dell PowerVault MD3260 | Dell PowerVault MD Series Storage Arrays
SMI-S Provide - Page 11
failed because of an authentication failure. Update the Property Secret with the current storage array password in the SharedSecret instance by using Modify Instance CIM. You can using the CIM CLI application: command line interface. roundTripTime is incorrect in ClientOpPerformanceData 11
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
Dell PowerVault MD Series Storage Arrays
SMI-S Provider Installation Guide