Dell PowerVault MD3660f CLI Guide - Page 140
Download Storage Array Firmware/NVSRAM, Never Attempted With Reason.
View all Dell PowerVault MD3660f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
download firmware on all of the physical disks in the storage array. See Download Storage Array Physical Disk Firmware.) This command blocks all I/O activity until the download finishes or fails. The download returns one of the following statuses: • Successful • Unsuccessful With Reason • Never Attempted With Reason. This command is used to download a firmware image to only one physical disk at a time. If you use this command in a script, ensure that you use this command only once. If you use this command more than once, the operation may fail. You can download firmware images to all of the physical disks in a storage array at one time by using the Download Storage Array Physical Disk Firmware command. Syntax download physicalDisk [enclosureID,slotID] firmware file="filename" Parameters Parameter physicalDisk filename Description Physical disk to which to download the firmware image. Specify the enclosure ID and slot ID for the physical disk. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. File path and file name of the file that contains the firmware image. You must put quotation marks (" ") around the firmware image file path and file name. Download Storage Array Firmware/NVSRAM This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array. If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command. Syntax download storageArray firmware [, NVSRAM] file="filename" [, "NVSRAM-filename"] [downgrade=(TRUE | FALSE)] [activateNow=(TRUE | FALSE)] Parameters Parameter Description NVSRAM Specifies that you want to download a file with NVSRAM values when you download a firmware file. You must not put brackets around this parameter. Include a comma after the term firmware. file File path and name of the file that contains the firmware. Valid file names must end with a .dlp extension. You must put quotation marks (" ") around the file name. 140