Dell PowerVault MD3660f CLI Guide - Page 217
Stop Snapshot, Stop Storage Array Blink, Stop Storage Array iSCSI Session
View all Dell PowerVault MD3660f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
NOTE: Use the start physicalDiskChannel faultDiagnostics command and the save physicalDiskChannel faultDiagnostics command with the stop physicalDiskChannel faultDiagnostics command. These commands are needed to start the diagnostic test and save diagnostic test results to a file. You can also stop the start physicalDiskChannel faultDiagnostics command at any time by pressing . Stop Snapshot This command stops a copy-on-write operation. Syntax stop snapshot (virtualDisk [virtualDiskName] | virtualDisks [virtualDiskName1... virtualDiskNameN]) Parameter Parameter virtualDisk or virtualDisks Description Name of the virtual disk for which to start the formatting. You must put brackets ([ ]) around the virtual disk name. If the virtual disk name has special characters, you must also put quotation marks (" ") around the virtual disk name. Stop Storage Array Blink This command turns off the indicator lights on the storage array that were turned on by the start storageArray blink command. Syntax stop storageArray blink Parameters None. Stop Storage Array iSCSI Session This command forces the termination of an iSCSI session Syntax stop storageArray iscsiSession [sessionNumber] Parameter Parameter sessioNumber Description The identifier number of the iSCSI session. Enclose the identifier number of the iSCSI session in square brackets ([ ]). Stop Storage Array Physical Disk Firmware Download This command stops a firmware download to the physical disks in a storage array that was started with the download storageArray physicalDiskFirmware command. This command does not stop a firmware download that is 217