Dell Precision 5520 Owners Manual - Page 22
Installing the Memory Module(s), System fan, Removing the Fans
View all Dell Precision 5520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
a) Base cover b) battery 3. Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the system board [2]. Installing the Memory Module(s) 1. Insert the memory module into the memory socket. 2. Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and re-install it. 3. Install the: a) battery b) base cover 4. Follow the procedures in After Working Inside Your Computer. System fan Removing the Fans 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) Base cover b) battery 3. Perform the following steps to remove the left video-card fan: a) Disconnect the fan cable from the system board [1]. b) Remove the two M2x4 screws that secure the fan to the system board[2]. c) Lift the fan away from the computer [3] 22 Disassembly and reassembly