Dell Precision M4500 Service Manual - Page 13
DC-In Port - hard drive removal
View all Dell Precision M4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Back to Contents Page DC-In Port Dell Precision™ Mobile Workstation M4500 Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. Removing the DC-In Port NOTE: You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below. 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Remove the access panel. 4. Remove the subscriber identity module (SIM) card. 5. Remove the optical drive. 6. Remove the keyboard. 7. Remove the coin-cell battery. 8. Remove the hinge covers. 9. Remove the display assembly. 10. Remove the hard drive. 11. Remove the Latitude ON™ Flash card. 12. Remove the wireless wide area network (WWAN) card. 13. Remove the wireless local area network (WLAN) card. 14. Remove the heat sink and fan assembly. 15. Remove the processor. 16. Remove the palm rest assembly. 17. Remove the Bluetooth® card. 18. Remove the ExpressCard board. 19. Remove the SD card board. 20. Remove the system board. 21. Remove the I/O port card. 22. Release the DC-in port from its routing guides on the chassis. 23. Lift the DC-In port up and remove it from the chassis. Replacing the DC-In Port To replace the DC-In port, perform the above steps in reverse order. Back to Contents Page