Dell Precision Rack 7910 Information Update - Dell Precision Rack 7910
Dell Precision Rack 7910 Manual
View all Dell Precision Rack 7910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Precision Rack 7910 manual content summary:
- Dell Precision Rack 7910 | Information Update - Dell Precision Rack 7910 - Page 1
/Error Message System halts during XenServer 6.2 OS installation. Solution Disable USB 3.0 in System setup. NOTE: Refer to the Owner's manual for System setup information on Precision Rack 7910 at dell.com/ manuals On-board AHCI HDD controller is not supported. Use PERC controller. AMD FirePro - Dell Precision Rack 7910 | Information Update - Dell Precision Rack 7910 - Page 2
to AMD documentation. OS Deployment of Driver Packs is not supported. Server Cab files are used for driver updates. NOTE: OSD is not supported on R7910. IPMI is not supported on Windows 7. nVIDIA Tesla is not supported on Win7 x32 OS. Intel 3120A is not supported on Win7 x32 OS. VMware Host - Dell Precision Rack 7910 | Information Update - Dell Precision Rack 7910 - Page 3
in a RAID configuration. Drives 0-3. Drives 4-7 can be configured as JBOD (non-RAID, just a bunch of disks). System cannot be remotely turned ON. You must wait a minimum of 30 seconds from the time the system is remotely turned OFF to the time it is turned ON. Not all NIC ports support Pre-boot - Dell Precision Rack 7910 | Information Update - Dell Precision Rack 7910 - Page 4
. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective
Dell Precision Rack 7910
Information Update Tech Sheet
Information Update for Dell Precision Rack 7910
This section provides information on the possible error messages and the solutions on the Dell Precision
Rack 7910.
NOTE:
The information in this tech sheet supersedes the information available in the Owner's
Manual.
Category
Issue/Error Message
Solution
Citrix
System halts during XenServer 6.2 OS
installation.
Disable USB 3.0 in System setup.
NOTE:
Refer to the Owner’s
manual for System setup
information on Precision
Rack 7910 at
dell.com/
manuals
On-board AHCI HDD controller is not
supported.
Use PERC controller.
AMD FirePro W5100 GPU is not
supported.
Select nVIDIA GPU in the System
setup.
nVIDIA Quadro GPU is not supported.
Select other nVIDIA GPU in the
System setup.
System halts during XenServer 6.2 OS
installation.
ATS must be disabled in the
System setup.
No disk is detected when installing
XenServer 6.2 OS connected to H330
PERC controller.
The Megaraid driver must be
loaded manually. Please consult
with Citrix support website for
latest drivers.
Video interface freezes when running
with Windows Media Player (WMP) after
about 30 minutes.
Disable "Windows Media
Redirection" in setting of Studio
for WMP.
SR-IOV is currently not supported by
XenServer.
Only two virtual CPUs work when
assigning more than 2 virtual CPUs to
Windows Virtual Machine (VM) using
nVIDIA GRID card.
Please reference nVIDIA
documentation for workaround.
2014- 09