Dell Precision Rack 7910 Information Update - Dell Precision Rack 7910 - Page 3

Intel RSTe PCoIP PXE NDC 10G port PERC iSCSI SATA SSD ISCSI WHQL Compliance Only 4 drives can be configured as RAID. Only 4 drives can be used in a RAID configuration. Drives 0-3. Drives 4-7 can be configured as JBOD (non-RAID, just a bunch of disks). System cannot be remotely turned ON. You must wait a minimum of 30 seconds from the time the system is remotely turned OFF to the time it is turned ON. Not all NIC ports support Pre-boot Execution Environment (PXE). Port 1 of the 4 port 1g Network Daughter Card (NDC) supports PXE. Port 3 of the 2+2 NDC supports PXE. No function when plugging 10g NDC port to 100 Mbs switch. 10g NDC ports are incompatible with 100Mbps full duplex switch port. RAID 6/50/60 are not supported. Cannot connect iSCSI device. iSCSI is not supported on Precision R7910 SATA SSD devices are recognized as external devices SATA SSD devices are recognized as external devices under OS when using the onboard AHCI controller. Cannot connect iSCSI boot device in UE iSCSI support for system. FI mode. WHQL Sleep and PNP test will fail. Install the Intel RSTe driver first, followed by the Intel chipset driver. Finding More Information and Resources See the safety and regulatory documents that shipped with your computer and the regulatory compliance website at www.dell.com/regulatory_compliance for more information on: • Safety best practices • Regulatory certification • Ergonomics See www.dell.com for additional information on: • Warranty • Terms and Conditions (U.S. only) • End User License Agreement Additional information on your product is available at www.dell.com/support. 3