Dell Precision T1700 Owner's Manual - Small Form Factor - Page 22
Removing the Input/Output (I/O) Panel
View all Dell Precision T1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3. Install the: a) drive cage b) optical drive c) front bezel d) cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) front bezel c) optical drive d) drive cage 3. Disconnect and un-thread the I/O panel/ FlyWire cable from the fan-shelter clip and heat sink. 4. Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to the right to release and remove from the computer. 22
3.
Install the:
a)
drive cage
b)
optical drive
c)
front bezel
d)
cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
cover
b)
front bezel
c)
optical drive
d)
drive cage
3.
Disconnect and un-thread the I/O panel/ FlyWire cable from the fan-shelter clip and heat sink.
4.
Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to the right to release and
remove from the computer.
22