Dell Precision T3610 Dell Precision Workstation T3610 Owners Manual - Page 12
Installing the PSU Card, Removing the Front Bezel, After Working Inside Your Computer
View all Dell Precision T3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the PSU Card 1. Replace the PSU card in its slot. 2. Tighten the screws to secure the PSU card in its slot. 3. Connect the power cables to the connectors on the system board. 4. Replace the baffle cover in its slot. 5. Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel. 4. Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge of the bezel from the chassis. 12
Installing the PSU Card
1.
Replace the PSU card in its slot.
2.
Tighten the screws to secure the PSU card in its slot.
3.
Connect the power cables to the connectors on the system board.
4.
Replace the baffle cover in its slot.
5.
Install the cover.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Gently pry the front bezel retention clips away from the chassis located at the edge of front bezel.
4.
Rotate and pull the bezel panel away from the computer to release the hooks on the opposite edge of the bezel from
the chassis.
12