Dell Precision T5500 Service Manual - Page 11
State, Light Pattern, 1 2 3 4, Light, Description, State Assignment, State Description, Power light - cpu riser
View all Dell Precision T5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Pb2 Pb3 Pb4 Pb5 Pb6 Pb7 Pb8 Pb9 Pb10 Pb11 Pb12 Pb13 Pb14 Pb15 1- Off 2- Off 3- Solid 4- Off 1- Off 2- Off 3- Solid 4- Solid 1- Off 2- Green 3- Off 4- Off 1- Off 2- Green 3- Off 4- Green 1- Off 2- Green 3- Green 4- Off 1- Off 2- Blink 3- Blink 4- Blink 1- Green 2- Off 3- Off 4- Off 1- Blink 2- Off 3- Off 4- Blink 1- Blink 2- Off 3- Blink 4- Off 1- Blink 2- Off 3- Blink 4- Blink 1- Blink 2- Blink 3- Off 4- Off 1- Blink 2- Blink 3- Off 4- Blink 1- Green 2- Green 3- Green 4- Off 1- Green 2- Green 3- Green 4- Green Reserved Reserved ACPI S3 Suspend to RAM Windows Standby State. Reserved Reserved Reserved Reserved Reserved Reserved ACPI S0, hand off System on. BIOS not execution. This is the transition state to POST states. to BIOS control Reserved Reserved Non-System board Regulator Failure A power failure has been detected on a plug-in component such as VRM, Video Riser, or Memory Riser. PSU Failure PSU may be bad or PSU cable may be crimped creating a short on a main power rail. (PS_ON asserted, PS_PWRGOOD not asserted) All PSU cables may not be properly connected to system board. (PS_ON asserted, PSU Cable Failure missing a main power rail) System board Regulator Failure A power failure has been detected in one of the onboard system board regulators. This could be caused by a failed system board component or by a plug-in device creating a short on a regulated power rail. (PS_ON asserted, PS_PWRGOOD asserted, SYS_PWRGOOD de-asserted) Mismatch Hardware detected a population incompatibility with a critical system component such as CPU, VRM, PSU, or MEMORY RISER. Reserved Reserved Reserved Reserved POST Diagnostic Light Patterns All POST codes except S0 are accompanied by a Solid Green Power light state. If the power light is not green, see Pre-POST Diagnostic Light Patterns. State S0a S0e S1 S2 S3 S4 Light Pattern ( 1 2 3 4 ) Light State State Assignment Description Name State Description 1- Off 2- Off 3- Off 4- Off OFF OFF Power light Off. No power is supplied to the system. 1- Off 2- Off 3- Off 4- Off Normal Operation, Power light Solid Green. System has successfully booted and is operating ON ACPI S0 normally. 1- Off 2- Off 3- Off 4- Solid RCM System is in Recovery Mode BIOS checksum failure was detected and the system is now in recovery mode. 1- Off 2- Off 3- Solid 4- Off CPU CPU CPU configuration activity is in progress or a CPU failure was detected. 1- Off 2- Off 3- Solid 4- Solid MEM Memory Memory subsystem configuration activity is in progress. Appropriate memory modules were detected but a memory failure has occurred. 1- Off 2- Solid 3- Off 4- Off PCI PCI device PCI device configuration activity is in progress or PCI device failure was detected.