Dell Precision T5610 Owners Manual - Page 15
Installing the Hard Drive, Removing the Thermal Sensor, After Working Inside Your Computer
View all Dell Precision T5610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6. If a 2.5-inch hard drive is installed, remove the screws and lift up the drive to remove it from the hard-drive caddy. Installing the Hard Drive 1. If a 2.5-inch hard drive is installed on the computer, place the hard drive on the hard-drive caddy and tighten the screws to secure the hard drive. 2. Press in on the latches of the hard-drive cage and slide it inside the compartment. 3. Connect the hard-drive power supply cable. 4. Connect the hard-drive data cable. 5. Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Thermal Sensor NOTE: The thermal sensor is an optional component and your computer may not ship with it. 1. Follow the procedures in Before Working On Your Computer. 2. Remove the cover. 3. Identify the thermal sensor connected to the system board. 15