Dell Precision T5610 Owners Manual - Page 18
Installing the Input/Output (I/O) Panel, Removing the Air Tunnel
View all Dell Precision T5610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
6. Remove the screws which secure the I/O panel to the chassis. 7. Remove the I/O panel from the chassis. Installing the Input/Output (I/O) Panel 1. Replace the I/O panel in its slot. 2. Tighten the screws securing the I/O panel to the chassis 3. Attach the cables to the I/O panel. 4. Slide the USB 3.0 module in its slot. 5. Tighten the screws securing the USB 3.0 module to the I/O panel. 6. Install: a) front bezel b) cover 7. Follow the procedures in After Working Inside Your Computer. Removing the Air Tunnel NOTE: The air tunnel is an optional component and your computer may not ship with it. 1. Follow the procedures in Before Working On Your Computer. 2. Remove: a) cover 18
6.
Remove the screws which secure the I/O panel to the chassis.
7.
Remove the I/O panel from the chassis.
Installing the Input/Output (I/O) Panel
1.
Replace the I/O panel in its slot.
2.
Tighten the screws securing the I/O panel to the chassis
3.
Attach the cables to the I/O panel.
4.
Slide the USB 3.0 module in its slot.
5.
Tighten the screws securing the USB 3.0 module to the I/O panel.
6.
Install:
a)
front bezel
b)
cover
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Air Tunnel
NOTE:
The air tunnel is an optional component and your computer may not ship with it.
1.
Follow the procedures in
Before Working On Your Computer
.
2.
Remove:
a)
cover
18