Dell S1709WFP User's Guide - Page 5
Monitor Specifications
View all Dell S1709WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Label Description 1 AC power connector 2 VGA connector Use To connect the monitor power cable. To connect your computer to the monitor using a VGA cable. Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor. Power Management Modes If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Normal operation Active-off mode Switch off Horizontal Sync Active Inactive - Vertical Sync Active Inactive - Video Active Blank - Power Indicator White Amber Off Power Consumption 34 W (maximum) Less than 2 W Less than 1 W The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD. NOTE: Dell S1709W Flat Panel monitor is ENERGY STAR®-compliant. Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin Assignments 15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red