Dell S300W User Guide - Page 92
continued, Set Up, Power
UPC - 884116043928
View all Dell S300W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Problem (continued) The image is stretched when displaying a 16:9 DVD Image is reversed Lamp is burned out or makes a popping sound LAMP light is solid amber LAMP light is blinking amber TEMP light is solid amber Possible Solution (continued) The projector automatically detects the input signal format. It will maintain the aspect ratio of the projected image according to input signal format with an Original setting. If the image is still stretched, adjust the aspect ratio in the Set Up menu in the OSD. Select Set Up from the OSD and adjust the projector mode. When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on. To replace the lamp, see "Changing the Lamp" on page 96. If the LAMP light is solid amber, replace the lamp. If the LAMP light is blinking amber, Lamp module connection may be disrupted. Please check the lamp module and ensure that it is properly installed. If the LAMP light and the Power light are blinking amber, the lamp driver has failed and the projector will automatically shut down. If the LAMP and TEMP light are blinking amber and the Power light is solid blue, the color wheel has failed and the projector will automatically shut down. To clear the protection mode, press and hold the POWER button for 10 seconds. The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell™. 92 Troubleshooting Your Projector