Dell S320wi - Page 41
OSD warning messages - low battery, Combinations of buttons, Left + Function, Hold Function
View all Dell S320wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Left 3 Function 4 Mini USB charge connector 5 LED indicators 6 Right 7 Power switch 8 Firmware upgrade connector This button acts like the left click button of a mouse. Functions available are listed in the OSD Menu "Set function" (see page 70). NOTE: Double-clicking the Function button will act as Undo, if supported by the software. Allow you use Mini USB cable to charge. See "Charging the Interactive Pen Battery" on page 44. Two LED indicators are available: Green and Amber (see "Interactive Pen LED Guiding Signals" on page 133). This button acts like the right-click button of a mouse. Turns the Interactive Pen on or off. For Interactive Pen and RF board firmware upgrade. OSD warning messages - low battery • The Low Battery warning message pops up when the battery voltage is lower than 2 V. At this condition, the pen can still work about 1~2 hours. • The pen will be disabled when the battery voltage is lower than 1.8 V. Combinations of buttons • Left + Function: The Pen Information menu appears on the screen. • Hold Function: Hold the Function button for 2 seconds and the Function mean will appear on the screen. Use Left/Right to move up/down and use Function to enter/apply. • When Toggle is selected in the Set Function menu, press the Function button to select Normal/Draw/Stable mode. NOTE: Interactive pen cannot support Windows Mouse property function "Switch primary and secondary buttons". Using Your Projector 41