Dell S4112F Open Networking Hardware Diagnostic Guide December 2021 - Page 78
v N, OPTION, --vendorattribute=N, s NAME[, VALUE], --set=NAME[
View all Dell S4112F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
-s VALUE, --smart=VALUE Enable/disable SMART on device (on/off) -o VALUE, --offlineauto=VALUE (ATA) Enable/disable automatic offline testing on device (on/off) -S VALUE, --saveauto=VALUE Enable/disable Attribute autosave on device (on/off) (ATA) -s NAME[,VALUE], --set=NAME[,VALUE] Enable/disable/change device setting: aam,[N|off], apm,[N|off], lookahead,[on|off], security-freeze, standby,[N|off|now], wcache,[on|off], rcache,[on|off], wcreorder,[on|off] READ AND DISPLAY DATA OPTIONS ===== -H, --health Show device SMART health status -c, --capabilities Show device SMART capabilities (ATA) -A, --attributes Show device SMART vendor-specific Attributes and values -f FORMAT, --format=FORMAT Set output format for attributes: old, brief, hex[,id|val] (ATA) -l TYPE, --log=TYPE Show device log. TYPE: error, selftest, selective, directory[,g|s], xerror[,N][,error], xselftest[,N][,selftest], background, sasphy[,reset], sataphy[,reset], scttemp[sts,hist], scttempint,N[,p], scterc[,N,M], devstat[,N], ssd, gplog,N[,RANGE], smartlog,N[,RANGE] -v N,OPTION , --vendorattribute=N,OPTION Set display OPTION for vendor Attribute N (see man page) (ATA) -F TYPE, --firmwarebug=TYPE (ATA) Use firmware bug workaround: none, nologdir, samsung, samsung2, samsung3, xerrorlba, swapid -P TYPE, --presets=TYPE Drive-specific presets: use, ignore, show, showall (ATA) -B [+]FILE, --drivedb=[+]FILE Read and replace [add] drive database from FILE [default is +/usr/etc/smart_drivedb.h and then /usr/share/smartmontools/drivedb.h] (ATA) DEVICE SELF-TEST OPTIONS ===== -t TEST, --test=TEST Run test. TEST: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] -C, --captive Do test in captive mode (along with -t) -X, --abort Abort any non-captive test on device SMARTCTL EXAMPLES ===== smartctl --all /dev/hda (Prints all SMART information) smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda (Enables SMART on first disk) smartctl --test=long /dev/hda (Executes extended disk self-test) 78 Dell EMC DAIG-OS tools