Dell S4148U-ON EMC Networking Deploying Native Fibre Channel - Page 5
Test Setup
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Test Setup Figure 1 shows the setup used to test native Fibre-Channel deployment on the Dell EMC S4148U. The following list describes the setup: Traffic is uni-directional, from host to target Storage traffic is generated by the server The S4148U is running OS10 (10.4.0(X2)) The target storage device is an emulated FC target (SAN Blaze) Connection is at 16Gbps Dell EMC S4148U-ON Fibre-Channel test setup 5 Dell EMC Networking - Deploying Native Fibre-Channel | 1.0
![](/manual_guide/products/dell-powerswitch-s4148uon-emc-networking-deploying-native-fibre-channel-53a511f/5.png)
5
Dell EMC Networking
–
Deploying Native Fibre-Channel | 1.0
Test Setup
Figure 1 shows the setup used to test native Fibre-Channel deployment on the Dell EMC S4148U. The following list
describes the setup:
Traffic is uni-directional, from host to target
Storage traffic is generated by the server
The S4148U is running OS10 (10.4.0(X2))
The target storage device is an emulated FC target (SAN Blaze)
Connection is at 16Gbps
Dell EMC S4148U-ON Fibre-Channel test setup