Dell S5148F-ON Open Networking Hardware Diagnostic Guide December 2021 - Page 33
gpiotool
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Getting Details for Fan 4 Fan 4 is Present Fan 4 Air flow type is Front To Rear Fan 4 status Normal Fan 4 speed is 8757 RPM Getting Details for Fan 5 Fan 5 is Present Fan 5 Air flow type is Front To Rear Fan 5 status Normal Fan 5 speed is 8492 RPM Getting Details for Fan 6 Fan 6 is Present Fan 6 Air flow type is Front To Rear Fan 6 status Normal Fan 6 speed is 8777 RPM Getting Details for Fan 7 Fan 7 is Present Fan 7 Air flow type is Front To Rear Fan 7 status Normal Fan 7 speed is 8348 RPM Getting Details for Fan 8 Fan 8 is Present Fan 8 Air flow type is Front To Rear Fan 8 status Normal Fan 8 speed is 8585 RPM Getting Details for Fan 9 Fan 9 is Present Fan 9 Air flow type is Front To Rear Fan 9 status Normal Fan 9 speed is 8420 RPM Getting Details for Fan 10 Fan 10 is Present Fan 10 Air flow type is Front To Rear Fan 10 status Normal Fan 10 speed is 8566 RPM Fan Controller Test LPC Passed root@dell-diag-os:~# root@dell-diag-os:~# fantool --get --lpc Fan 1 speed is 8420 RPM Fan 2 speed is 8757 RPM Fan 3 speed is 8474 RPM Fan 4 speed is 8738 RPM Fan 5 speed is 8474 RPM Fan 6 speed is 8757 RPM Fan 7 speed is 8366 RPM Fan 8 speed is 8604 RPM Fan 9 speed is 8420 RPM Fan 10 speed is 8566 RPM [2]+ Done dhclient -q eth0 root@dell-diag-os:~# root@dell-diag-os:~# fantool --get --fan=2 --lpc Fan 2 speed is 8738 RPM root@dell-diag-os:~# gpiotool The gpiotool controls the state of the GPIO lines from the CPU or any other device that drives the GPIO lines. The CPU GPIO alines the map in Linux to /sys/class/gpio entries, which are manipulated through the standard read/write interfaces. There is chip numbering to support multiple GPIO chips, or chips at an offset. For devices such as the complex programmable logic device (CPLD) or field programmable gate arrays (FPGA), gpiotool accesses those devices to drive the GPIO lines using the standard bus interfaces such as i2c, mem, or pci. Dell EMC DAIG-OS tools 33