Dell Studio One 19 Service Manual - Page 45

Processor L2 Cache Memory Installed Memory Available Memory Speed Displays the processor L2 cache size. Indicates the amount of installed memory in MB. Indicates the amount of memory available in MB. Indicates the memory speed in MHz. Standard CMOS Features System Time System Date AHCI Port0 AHCI Port1 Displays current time in hh:mm:ss format. Displays the current date in mm:dd:yy format. Auto detects IDE devices in port 0. Auto detects IDE devices in port 1. Advanced BIOS Features CPU Feature USB Device Setting Describes type of processor. Enable or disable the USB controller /Set the operational USB speed. Advanced Chipset Features Onboard Audio Controller SATA Mode select Onboard LAN Controller Onboard LAN Boot ROM Allows you to enable or disable the audio controller. Allows you to switch between AHCI and IDE. Allows you to enable or disable onboard Broadcom network controller. Allows you to enable or disable ROM for Broadcom PCI E Network Controller. Boot Device Configuration Boot Settings Configuration Enable or disable fast boot and Numlock key. Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected. 1st Boot Device Specifies the boot sequence from the available devices. 2nd Boot Device Removable; CD/DVD; Hard Drive; Disabled (Removable by default). Specifies the boot sequence from the available devices. 3rd Boot Device Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default). Specifies the boot sequence from the available devices. Boot Other Device Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default). Allows you to boot through any other device. Power Management Features ACPI Suspend Type Specifies the suspend type. The default is S3. C1E Support This option allows you to enable or disable the "Enhanced Halt State". Remote Wake Up This option turns on the computer when a user tries to access the computer through the LAN. The default is Enabled. AC Recovery Auto Power On Enables you to set an alarm to turn on the computer automatically. The default is Disabled. BIOS Security Features Supervisor Password User Password Set Supervisor Password Status of supervisor password installed. Status of user password installed. Allows to set the desired supervisor password. Exit Exit Options Provides options to Load Optimal Default, Save and Exit Setup, and Exit Without Saving. Boot Sequence This feature allows you to change the boot sequence for devices. Boot Options