Dell Vostro 260s Owner's Manual (Mini Tower) - Page 38
cover, After Working Inside Your Computer
View all Dell Vostro 260s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
NOTE: The processor is notched at one end with a triangle marking. The same marking is also notched on the processor socket. 2. Press down on the release lever to lock it with the retention hook. 3. Close the processor cover. 4. Place the heat sink and fan assembly on the processor. 5. Tighten the captive screws securing the heat sink and fan assembly to the system board. 6. Connect the heat sink and fan assembly cable to the system board. 7. Replace the cover. 8. Follow the procedures in After Working Inside Your Computer. 38
NOTE:
The processor is notched at one end with a triangle marking. The same
marking is also notched on the processor socket.
2.
Press down on the release lever to lock it with the retention hook.
3.
Close the processor cover.
4.
Place the heat sink and fan assembly on the processor.
5.
Tighten the captive screws securing the heat sink and fan assembly to the
system board.
6.
Connect the heat sink and fan assembly cable to the system board.
7.
Replace the
cover
.
8.
Follow the procedures in
After Working Inside Your Computer
.
38