Dell Vostro 260s Owner's Manual (Mini Tower) - Page 59

Disconnect the USB device. The USB, CAUTION - Hard Drive SELF MONITORING

Get Dell Vostro 260s PDF manuals and user guides View all Dell Vostro 260s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

System Message Keyboard failure No boot device available Description Keyboard failure or loose cable. If reseating the cable does not solve the problem, replace the keyboard. No bootable partition on hard disk drive, the hard disk drive cable is loose, or no bootable device exists. • If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a boot device. • Enter system setup and ensure that the boot sequence information is correct. No timer tick interrupt A chip on the system board might be malfunctioning or motherboard failure. USB over current error Disconnect the USB device. The USB device needs more power for it to function properly. Use an external power source to connect the USB device, or if the device has two USB cables, connect both of them. CAUTION - Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem S.M.A.R.T error, possible hard disk drive failure 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
System Message
Description
Keyboard failure
Keyboard failure or loose cable. If
reseating the cable does not solve the
problem, replace the keyboard.
No boot device available
No bootable partition on hard disk drive,
the hard disk drive cable is loose, or no
bootable device exists.
•
If the hard drive is your boot device,
ensure that the cables are connected
and that the drive is installed properly
and partitioned as a boot device.
•
Enter system setup and ensure that
the boot sequence information is
correct.
No timer tick interrupt
A chip on the system board might be
malfunctioning or motherboard failure.
USB over current error
Disconnect the USB device. The USB
device needs more power for it to function
properly. Use an external power source to
connect the USB device, or if the device
has two USB cables, connect both of
them.
CAUTION - Hard Drive SELF MONITORING
SYSTEM has reported that a parameter
has exceeded its normal operating range.
Dell recommends that you back up your
data regularly. A parameter out of range
may or may not indicate a potential hard
drive problem
S.M.A.R.T error, possible hard disk drive
failure
59