Dell Vostro 3030 Small Desktop Owners Manual - Page 67
Installing the processor fan and heat-sink assembly
![]() |
View all Dell Vostro 3030 Small manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
About this task The following images indicate the location of the fan and heat-sink assembly and provide a visual representation of the removal procedure. Figure 48. Removing the processor fan and heat-sink assembly Steps 1. Disconnect the fan and heat-sink assembly cable from the connector on the system board. 2. In a reverse sequential order (4>3>2>1), loosen the four captive screws that secure the processor fan and heat-sink assembly to the system board. 3. Lift the processor fan and heat-sink assembly from the system board. Installing the processor fan and heat-sink assembly CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following images indicate the location of the fan and heat-sink assembly and provide a visual representation of the installation procedure. Removing and installing Field Replaceable Units (FRUs) 67
![](/manual_guide/products/dell-vostro-3030-small-desktop-owners-manual-ce98706/67.png)