Dell Vostro 3590 With optical drive Service Manual - Page 27
Removing the M.2 2280 Solid-state drive or Intel Optane memory - Optional
View all Dell Vostro 3590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Removing the M.2 2280 Solid-state drive or Intel Optane memory - Optional Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. Steps 1. Loosen the captive screw that secures the thermal plate to the palmrest and keyboard assembly [1]. 2. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [2]. 3. Slide and remove the thermal plate from the solid-state drive/Intel Optane slot [3]. 4. Slide and lift the solid-state drive/Intel Optane off the palmrest and keyboard assembly [4]. Removing and installing components 27