Dell Vostro 3590 With optical drive Service Manual - Page 40
VGA Daughterboard, Removing the VGAcable
![]() |
View all Dell Vostro 3590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Replace the three (M2x3) screws that secure the heatsink to the system board [2]. 3. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [3]. Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer VGA Daughterboard Removing the VGAcable Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. 6. Remove the memory 7. Remove the WLAN 8. Remove the SSD 9. Remove the coin cell battery 10. Remove the hard drive assembly 11. Remove the system fan 12. Remove the heatsink 40 Removing and installing components
![](/manual_guide/products/dell-vostro-3590-optical-drive-service-manual-4ee1517/40.png)