Dell Vostro 5460 Dell Vostro 5460 Owner's Manual - Page 15
Installing the Heat Sink, Removing the Memory
View all Dell Vostro 5460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Heat Sink 1. Place the heat sink into its original position on the system board. 2. Tighten the screws that secure the heat sink to the system board. 3. Install : a) system fan b) battery c) base cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) base cover b) battery c) system fan d) heat sink 3. Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board. 15
Installing the Heat Sink
1.
Place the heat sink into its original position on the system board.
2.
Tighten the screws that secure the heat sink to the system board.
3.
Install :
a)
system fan
b)
battery
c)
base cover
4.
Follow the procedures in
After Working Inside Your Computer.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
base cover
b)
battery
c)
system fan
d)
heat sink
3.
Pry the securing clips away from the memory module until it pops up. Remove the memory module from its
connector on the system board.
15