Dell Vostro 5460 Dell Vostro 5460 Owner's Manual - Page 20

Installing the Speakers, Removing the Display Assembly

Page 20 highlights

Installing the Speakers 1. Place the speakers into its original position on the computer. 2. Route the speaker cable along the routing channel. 3. Connect the speaker connector to its slot on the system board. 4. Install : a) system board b) heat sink c) system fan d) coin-cell battery e) mSATA solid state drive f) WLAN card g) hard drive h) battery i) base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove : a) base cover b) battery 3. Disconnect the LVDS (low voltage differential signalling) cable and the camera cable from its connectors on the system board. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

Installing the Speakers
1.
Place the speakers into its original position on the computer.
2.
Route the speaker cable along the routing channel.
3.
Connect the speaker connector to its slot on the system board.
4.
Install :
a)
system board
b)
heat sink
c)
system fan
d)
coin-cell battery
e)
mSATA solid state drive
f)
WLAN card
g)
hard drive
h)
battery
i)
base cover
5.
Follow the procedures in
After Working Inside Your Computer.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove :
a)
base cover
b)
battery
3.
Disconnect the LVDS (low voltage differential signalling) cable and the camera cable from its connectors on the
system board.
20